Compressed air brake bleeding device
Special tool for changing the brake fluid and bleeding the brakes without outside help (1 man system). Brake fluid should be changed at least every 2 years.
Properties:
- Including the matching 1/4 "compressed air connection nipple
- for bleeding brakes, steering or clutch
- max. negative pressure: 60%
- Capacity of the container: 1.0 liters
- Hose length: approx. 1.2 m
- Working pressure: 5-8 bar
- Dimensions: (length 225mm), (width 135mm), (height 192mm)
Application: workshop and industry
With this brake bleeding device, you can bleed your brake system easily, quickly and easily without the need for outside help. Always start with the brake calliper that is furthest away from the brake fluid reservoir, i.e. always with the longest way.
You simply place the hose with the special nipple on the bleeding nipple of the brake calliper and open it, after you have switched on the compressor and there is pressure in the system, actuate the brake bleeder. This creates a vacuum of around 60%, which draws the old brake fluid into the container. Please always make sure that the vehicle does not empty the brake fluid reservoir. Fill in fresh brake fluid until fresh, clean brake fluid emerges from the bleeding nipples. Finally, close the bleed nipple so that no more brake fluid can escape. Finally, please check the level of the brake fluid in the brake fluid reservoir of the vehicle and fill it up if necessary.
Scope of delivery:
1 x compressed air brake bleeding device
