Innovative
machine polish for quick reconditioning of heavily weathered paintwork, for the
removal of deep scratches and for the effective removal of paint mist and
sanding up to 1,500 grain size. Thanks to the extremely homogeneous abrasive
grain, Heavy Cut 8.02 produces an extremely high cut with a very good gloss
level. Can be polished for an extremely long time with little dust or spray
development without burning in and can be wiped off perfectly. Ideally suited
for all types of paint (both soft and scratch-resistant).
Characteristics:
- Degree of
grinding: 8.5
- Degree of
gloss: 5.0
- coarse
sanding polish
- free of
silicone oil
Application
areas:
Paints on
cars, commercial vehicles, motorcycles, etc.
Recommended
use:
Use a
rotary polishing machine and a lambskin pad (with 1,500 - 2,500 bevel) or a
sanding sponge (with 2,500 - 5,000 bevel) in a criss-cross pattern. Use sanding
polish at medium speed and medium pressure. The best possible surface is
achieved by polishing with a high-gloss anti-hologram polish
achieved.
Warning
notices:
Shake well
before use. Protect from frost and excessive heat. Do not use on hot surfaces.
Check
suitability and compatibility before use.
Notice:
This
product information is intended to and can only provide you with non-binding
advice. Liability on our part cannot be derived from this. Please check whether
the product is suitable for your application. We are at your disposal for
advice.
Scope of
delivery:
1 x Koch
Chemie Koch Chemie Heavy Cut 8.02 coarse sanding polish 1000ml
